The X7 Series LED Headlights are superior to the traditional style halogen headlamps and also benefit in many factors over the HID style headlamps.A single X7 LED headlamp emits 4000 lumens in the 6000k color spectrum from 4 different facing sides of the unit covering every angle (other standard LED headlamps only emit from two sides). Just as bright as HIDs without the latency many HIDs experience when first turned on.LED headlamps overall consume less power & energy than HIDs and halogens as well as emit clear crisp light.The heat sink and cooling fan is integrated into the package of each headlamp to ensure better cooling also leading to longer lifetimes. These are a direct replacement to motorcycles using standard H7 bulbs.
LED headlights are a more efficient and cleaner alternative to both the HID and halogen headlights with a small carbon footprint. Most (including the X7 H7 LEDs) do not require a ballast and are a direct plug-in method to the the standard H7 connector. They output a high intensity of light, typically between 2000-5000 lumens with only drawing an amp or so of current. Standard halogens require around 4-4.5 amps each and are a high load to the electrical system. Due to all of the benefits of LED headlights, their costs have been respectively higher compared to HID and halogen headlights, but recently have been on the decline as the technology becomes more common and components becoming cheaper. We offer high output clear LED headlights that make a difference. Enhance your line of sight, make other motorist aware of your position, and improve your motorcycle’s efficiency.
The installation process is fairly simple requiring no tools or modifications to any parts. Estimated duration of the installation is around 10 minutes for two headlights. This process consists of removing the original headlight cap, removing the original headlight, installing the new LED headlight, and then installing the new cap adapter. In the video below a clear demonstration of the installation is performed to help as a guide.
Warning: By switching to an LED setup the headlamps do not burn hot enough to evaporate any moisture caught inside. If the install in done in a moist or relatively humid environment we recommend using an effective method to reduce or prevent moisture which can be found here.
Below are a few variations of motorcycles that use our headlight setup. The setup uses our LED headlight cap adapters and H7 LEDs, which can also be combined as a complete set. This set up can be applied across many different motorcycles. We are constantly developing new cap designs to accommodate more types of motorcycles. Please keep checking in to see if there’s a cap adapter for your motorcycle.
Bruce’s 2015+ Model R3
Fabian’s 06-07 Model R6r
Edgar’s 08-16 Model R6r
Mario’s 07-12 Model 600RR
For just the LED headlight caps check out LED Headlight Cap Adapters for an easy plug and play installation on your R1,R3, R6,CBR 600RR, and CBR 1000RR.